Security Fence

	D-Corative


			Security Fence Introduction D-corative is a unique intrusion detection system which easily integrates with any security metal fence. D-corative is the only detection systems which allow you to upgrade your existing fence into a smart electronic fence by adding D-corative sensor posts. D-corative is based on NIR advanced technology will provide your site with the highest level of security while at the same time will preserve a pleasant outlook. D-corative's technology was chosen throughout 2003 couple of times to be installed in high security sites while competing with other existing perimeter technologies. D-corative can be installed in gardens and forests. It will not get affected by tree branches blowing up the wind against the security fence, nor by plants or grass which grow next to the system. D-corative is designed to withstand harsh environmental and climatic conditions such as high temperatures, high moisture levels, excessive corrosion and sun exposure. Technology The principal and unique component of the D-corative is the sensing device. The post contains an electronic processor unit, which converts the analog signals, from the sensing device. The processor unit analyses the signals and serves as a local signal processing and analyzing system at the level of the post. The processor unit has a system of transmitters and receivers, which permit digital communications with any standard control panel and dry contacts (N.O. N.C.). The micro controller computes the change in the sensing device. When the time exceeds a set threshold, such as during an intrusion or cutting, an alarm signal will be recorded. Sensor The sensor is made of a rigid, hardened steel bar onto which strain gauge bridges are attached by a unique process. This measure the micro deformation of the bar due to changes in the stress. The sensor has no electrical contacts nor does it require any movement or turning on axes or rubber parts. The high sensitivity of the strain gauges and the special design of the steel bar enables an electrical signal to be obtained for a stress which is imperceptible without precision measuring instruments. The dynamic range of the sensor before the sensitive strain gauge is damaged or the steel bar is buckled is very far beyond the forces applied to it during an intrusion. Installation & Maintenance The D-corative system is based on existing decorative fencing such as decorative bars or decorative panels or any variation. The D-corative requires no special skills or training for installation, nor for maintenance. Thus, the system provides a cost effective solution for protection. Download full product review (PDF, 0.7MB)

51 Eitan St., Nir Zvi, Israel 72905 Tel: 972-8-9256257 Fax: 972-8-9256442 Email: dfence@netvision.net.il