| Energizer |
|  |
|
|


 |
|
DF-3100 (POWER SUPPLY/ENERGIZER)
DF-3100 generates high voltage electric pulses to the perimeter fence, controlling and monitoring the status of the wires and wire screen which carries the high voltage.
In addition, the DF-3100 can be connected to the inner coil of Electro coil Barbed Tape concertina. D-Fence DF-3100 operates 2 zones controls and monitors the perimeter
system on site. The system has capabilities of working in stand-alone mode, or when required to connect itself to D-Fence Computerized Control Center. Any intrusion attempt
will create a non-lethal electric shock to the intruder. At the same time the DF-3100 micro-processor which receives and evaluates each signal coming from the system will process
the specific signal and decides whether to trigger the system or not.
DF-3100 has a built in lightning protector which protects the systems circuit
boards, and 3 built-in vibration sensor inputs. DF-3100 works on the basis
of a microcomputer which controls the current carried on the wires. This completely
ensures that the DF-3100 will comply with the required safety standards, and ensures
that the current will never exceed the maximum required values.
DF-3100 is designed to withstand harsh environmental and climatic conditions
such as high temperatures, high moisture levels, excessive corrosion and sun exposure.
DF-3100 complies with environmental conditions according to MIL STD 810C
DF-3100 is designed to meet European Safety Standards, British Standards and stringent safety standards set by the Israeli Military. It is supplied in a cabinet
complying with the Standard IP 65. An alternative version is the supply in a cabinet complying with the more stringent standard MIL 810 (or IP67).
DF-3100 - Main Features
The DF-3100 will cause a non-lethal electric shock to the intruder.
Open architecture - can be integrated with most fence types.
Stand alone control unit.
The DF-3100 is suitable for all kind of installations.
Senses all intrusion attempts - by using a sophisticated controller.
Identifying the intrusion position by using an advanced strain gauge self-alignment sensor.
Cost effective detection length - controlled length from 250m to 500m.
Low false alarm rate - achieved by smart and advanced processing unit.
Easy installation - no special means required.
Operates under all weather and environmental conditions.
Manufactured according to safety standards.
|
|
|