Barrier and sensor in one
The coil still stops and delays the intruder; the sensors add an exact alarm zone.
The threat · Razor wire alone not stopping them?
Standard razor-wire concertina turned into a detection line: strain-gauge sensors report the exact zone of a cut or climb.

D-Concertina turns a standard razor-wire concertina of any diameter, in an open design, into an electronic intrusion detection system. The coil remains a barrier that is very hard to penetrate. D-FENCE strain-gauge sensors add the pinpoint location of every attempt.
The coil still stops and delays the intruder; the sensors add an exact alarm zone.
Retrofit two sensing wires inside the concertina you have, or install a complete new line.
Anti-corrosion treatment to MIL T 152, −25 °C to +72 °C, 10-year sensor warranty.
Two options. Retrofit an existing fence: two sensing wires are stretched inside the coil and connected to sensors on sensor posts. Or supply and install a complete new concertina line together with the electronic system.
Alarms are managed locally, remotely or from a central control centre. Typical sites: prisons, airports, ports, refineries, army bases and critical infrastructure.
Razor-wire concertina of any diameter mounts on arms or posts with strain-gauge sensors.
Two wires run inside the coil and connect to the sensors.
A cut, climb or push of 15 kg and above changes the tension and raises the alarm.
The alarm and its exact zone reach a local, remote or central control centre.
Every image opens full size. Product sheets are shown whole, exactly as D-FENCE publishes them.
Paste it into your specification. It defines the system by what it must do, so any alternative must meet every point.
The system shall be D-Concertina by D-FENCE Electronic Fencing and Security Systems Ltd. (ISO 9001:2015 certified quality management), or an approved equivalent that meets every requirement in this section.
Standard razor-wire concertina turned into a detection line: strain-gauge sensors report the exact zone of a cut or climb.
Before installation, the contractor shall submit the manufacturer's datasheet, the installation instructions and the zone layout for approval.
Tell us the site, the threat and the line. D-FENCE engineers propose the right barrier, sensor and platform, ready for your integrator.

Fence cut or climbed without anyone knowing?
Sensor posts tension the wires and pinpoint any cut, climb or spread, on a new fence, a wall or an existing one.

Climbers and cutters at a high-risk site?
Welded razor-blade mesh built to resist climbing and cutting, with D-FENCE strain-gauge sensors reporting every attempt 24/7.

Alarms lost between separate systems?
Every sensor, camera and alarm on one geolocated map, in the control room or on a phone.
Products, solutions and pages