Skip to content
D-FENCE Electronic Fencing and Security Systems Ltd.D-FENCE Electronic Fencing and Security Systems Ltd.

Detect at the fence.Stop before the breach.

D-FENCE turns every fence, wall and gate into a perimeter intrusion detection system (PIDS). It feels the attempt, names the zone and puts a camera on it in under 3 seconds. 0 false alarms.

  1. DetectA real climb, cut or lift.
  2. LocateThe exact zone, at once.
  3. VerifyThe nearest camera on target.
  4. RespondSiren, lights, patrol.

Six ways to guard a line.

Pick by barrier, climate and false-alarm tolerance.

  • Vibration cable

    Hears the fence. Hears the wind too.

  • Fibre optic

    Long lines and pipelines.

  • Microwave & IR beams

    Open corridors, clear line of sight.

  • Buried sensors

    Covert ground lines.

  • Taut wire

    High-security fences.

  • D-FENCE strain gauge

    Measures real load. Built for 0 false alarms.

Weight is the signal.

The sensor lives inside the barrier. A climb, a cut or a lift changes the load. Nothing else raises the alarm.

A D-FENCE stainless-steel sensor unit with its two mounting straps bolted to a black palisade fence at a post, sensor cables running down from the box
D-FENCE sensor unit on a palisade fence
0
false alarms
<3s
to camera on target
58
countries
6,500+
km protected
LIVE

0 false alarms

Wind, birds, heat and rain never raise an alarm. Only an intruder’s real load, above the trigger threshold, does. Choose what happens at the fence.

020406080 Alarm activation · 20 kg Time →
Load on the sensor (kg)
0false alarms
Normal · no alarm
0.0kg

Wind presses on the panels with 4–15 kg. Below the activation force: no alarm.

Six questions before you buy.

  1. Which attacks does it detect?
  2. How does it hold up in wind, rain and snow?
  3. How precisely does it locate the attempt?
  4. Does it fit the fences and walls you already have?
  5. Does it talk to your cameras and command centre?
  6. Which patents and references stand behind it?

A sensor for every boundary.

All products PIDS by sector

Frequently asked.

What is a Perimeter Intrusion Detection System (PIDS)?

A PIDS detects and locates an attempt to breach a site's boundary, by climbing, cutting, lifting or digging, and raises an alarm in the control room with the exact zone, so cameras and response teams can act at once. D-FENCE PIDS turn fences, walls, gates, roofs and even floors into sensors.

How does D-FENCE detection work?

Patented strain-gauge pressure sensors measure real mechanical load: the weight of a person on a wall crown, the pull on a taut wire, the force on a fence panel. They respond to load, not to vibration, so they are built for minimised false alarms from wind, rain, birds and small animals.

Can it be installed on an existing fence or wall?

Yes. D-Taut Wire, D-Corative, D-Pressure Strip and D-Tech can be added to existing fences, walls and copings, or delivered as a complete new detection line.

How fast is an intrusion reported?

Under 3 seconds from contact to alert, with the zone that was touched, so the nearest camera can be on target at once.

Does it integrate with cameras, VMS and command systems?

Yes. D-FENCE controllers connect through dry contacts, RS232 / RS485 and IP interfaces. D-Command Control shows every sensor, camera and alarm on one geolocated map, in the control room or on a phone.

Is the technology patented?

Yes. D-FENCE sensor technology is covered by an international PCT application (WO 2022/264140) and seven granted Chinese patents and utility models.

Which sites use D-FENCE PIDS?

Airports (an international airport since 2005, Yang Yang and Yeosu in South Korea), military and border installations, power, oil and gas, rail and telecom infrastructure, ports, prisons, data centres and private residences, in 58 countries.

Is there lethal voltage on the fence?

No. D-FENCE sensors run on low voltage and put no lethal voltage on the line, so they suit public sites, homes and schools.

What about sites with no power or network?

AI-EYE IN THE SKY, an autonomous solar trailer with a telescopic camera mast, is operational in under 10 minutes with up to 72 hours of solar autonomy. NOA mobile observation systems mount thermal technology on security vehicles, adding an advanced layer of protection.

Send us your perimeter.

Name the site, the sector and the length of the line. D-FENCE sales replies by email or WhatsApp. We manufacture. You integrate.

Email
sales@d-fence.com
Write
WhatsApp · Phone
Chat on WhatsAppCall us

Enquiry

Your message is prepared on your own device and reaches us only when you press send in your e-mail or WhatsApp app. Privacy Policy

Your enquiry opens ready to send in your email app or in WhatsApp. Nothing is stored on this site.

WhatsApp