Security you cannot see
The detection is inside the capping or posts; the glass stays clear.
The threat · Glass balustrades climbed at night?
Turns a glass balustrade or glass wall into an intrusion detection system, without adding a single bar to the view.

D-Glass brings intrusion detection to glass fences, balustrades and walls. D-FENCE strain-gauge sensors are built either into the sensor posts that hold the glass panels or into a metal capping on top of the glass. The result: an electronic perimeter that looks like an ordinary balustrade.
The detection is inside the capping or posts; the glass stays clear.
A climber's weight alarms; a hand on the rail does not.
Capping material and profile are chosen to match the building.
When someone climbs over the balustrade, the sensors feel the weight and raise the alarm; the newest D-FENCE models also raise an alarm when a glass panel is broken. A touch or a lean on the capping does not trigger it. The capping comes in stainless steel, aluminium alloy or a metal coating, with an exterior designed to match the building.
D-Glass protects terraces, balconies and pool edges at homes and hotels, and glass partitions in museums and galleries. The alarm goes to the alarm panel, cameras, siren and floodlights, a phone app or the control room.
Strain-gauge sensors sit in the capping or in the posts between the panels.
Weight on the capping or force on a panel changes the load the sensor reads.
The alarm leaves as a dry contact or RS232 / RS485 message.
Cameras, siren and floodlight react on site.
The phone app, the control room and D-Command Control receive the event.
Every image opens full size. Product sheets are shown whole, exactly as D-FENCE publishes them.
Paste it into your specification. It defines the system by what it must do, so any alternative must meet every point.
The system shall be D-Glass by D-FENCE Electronic Fencing and Security Systems Ltd. (ISO 9001:2015 certified quality management), or an approved equivalent that meets every requirement in this section.
Turns a glass balustrade or glass wall into an intrusion detection system, without adding a single bar to the view.
Before installation, the contractor shall submit the manufacturer's datasheet, the installation instructions and the zone layout for approval.
Tell us the site, the threat and the line. D-FENCE engineers propose the right barrier, sensor and platform, ready for your integrator.

Intruders climbing over your wall?
A patented strain-gauge strip under the coping. Real weight on the wall raises the alarm; birds, cats and wind do not.

Intruders climbing over your ornamental fence?
Ornamental panels on sensor posts that raise the alarm on any climb, cut or leaning weight. High security that still looks welcoming.

Intruders crossing floors, decks or steps unseen?
Pressure sensors under tiles, stone, wood or steel turn any floor, deck or stair into a silent alarm zone.
Products, solutions and pages