Close the forgotten entry
Roofs, dormers and parapets get the same protection as the fence line.
The threat · Intruders coming in over the roof?
Strain-gauge sensors under or on top of any roof turn it into a protected zone. Completely invisible.

D-Roof is the D-FENCE intrusion detection system for roofs. It installs under or on top of any type of roof, totally invisible, and its built-in strain-gauge sensor adapts to the roof's design to give a real pre-alarm.
Roofs, dormers and parapets get the same protection as the fence line.
Nothing is added to the skyline; the sensors are under the finish.
The alarm comes while the intruder is still on the roof.
The moment an intruder enters a protected section, the pressure change raises the alarm and the D-FENCE computerised control centre is notified. On tiled roofs the sensor strips are laid under the tiles; on flat roofs they sit under sensor panels set into the roof surface.
Strips are customised to the roof, up to 6 m per unit, and carry covers of up to 350 kg; zones run up to 36 m. D-Roof shares the D-Tech specification and outputs, so it joins the rest of the site's perimeter on one screen.
Strain-gauge strips lie under the tiles or roof panels.
An intruder stepping onto a protected section changes the load.
About 15 kg above the cover weight raises the alarm; dry contact or RS485 out.
The D-FENCE computerised control centre and D-Command Control are notified.
Every image opens full size. Product sheets are shown whole, exactly as D-FENCE publishes them.
Paste it into your specification. It defines the system by what it must do, so any alternative must meet every point.
The system shall be D-Roof by D-FENCE Electronic Fencing and Security Systems Ltd. (ISO 9001:2015 certified quality management), or an approved equivalent that meets every requirement in this section.
Strain-gauge sensors under or on top of any roof turn it into a protected zone. Completely invisible.
Before installation, the contractor shall submit the manufacturer's datasheet, the installation instructions and the zone layout for approval.
Tell us the site, the threat and the line. D-FENCE engineers propose the right barrier, sensor and platform, ready for your integrator.

Walls climbed without anyone noticing?
An ultra-slim pressure sensor hidden under wall copings, gates and floors: it reports the climb and leaves the design untouched.

Intruders climbing over your wall?
A patented strain-gauge strip under the coping. Real weight on the wall raises the alarm; birds, cats and wind do not.

Glass balustrades climbed at night?
Turns a glass balustrade or glass wall into an intrusion detection system, without adding a single bar to the view.
Products, solutions and pages